External Data Storage Device Connected To The Usb Port - Seat Toledo Manual

card from the system, the function button
becomes inactive (grey colour).
● Press the inserted memory card. The mem-
ory card "jumps" to the eject position.
● Remove the memory card.
Unreadable memory card
If a memory card is inserted and the data
cannot be read, the relevant warning ap-
pears.
External data storage device connec-
ted to USB port 
Depending on the features and the country,
the vehicle may have one or two USB connec-
tions. For their location consult the
let Instruction Manual.
Audio files on an external data storage de-
vice connected to the USB port  can be
played and controlled via the Infotainment
system.
Where this manual refers to external data
storage devices, this means USB mass stor-
age devices containing supported audio
files, such as MP3 players, iPods™ and USB
sticks.
Only supported audio files are displayed and
played. Other files are ignored.
Audio and Media Mode
Further operation of the external data medi-
um (changing track, selecting tracks and
playback modes) is described in the appro-
priate chapters of this manual
Instructions and restrictions
Compatibility with Apple™ devices and other
media players depends on the unit.
The USB port  supplies the usual USB volt-
age of 5 volts for a USB connection.
External hard disks with a capacity greater
than 32 GB must be reformatted for the
FAT32 file system in some circumstances. You
will find the necessary software and informa-
tion on the Internet.
Take into account all other instructions and
limitations regarding requirements for media
›››
Book-
›››
sources page 39.
iPod™, iPad™ and iPhone™
Depending on the country and the equip-
ment, iPods™, iPads™ or iPhones™ can be
connected using the device's USB cable to
the USB port  of the vehicle and used as
audio sources.
After connecting an iPod™, iPad™ or
iPhone™, the specific list views of the iPod
are displayed in the upper selection level
(  Playlists ,  Artists
 Tracks ,  Podcasts
Possible error messages after connecting an
external data storage device
Error mes-
›››
page 39.
sage
The device
is not
compatible
The device
does not
work
Due to the large number of different data storage devi-
ces and various iPod™, iPad™ and iPhone™ genera-
tions available, it is not possible to guarantee fault-free
operation of all functions described here.
Disconnecting
Any connected data storage devices must be
prepared before their disconnection in order
to remove them.
● From the main Media menu, press the
button to open the
SETUP
menu or press the Infotainment
,  Albums ,
and then press
etc.).
settings menu.
Cause Procedure
The external Check the connec-
data carrier tion and make sure
cannot be the external data
played or com- storage device is
munication is working correctly.
not possible If possible, update
with the adapt- the external data
er cable being storage device soft-
used. ware.
Communication Check the connec-
fault. tion and make sure
the external data
medium is working
correctly.
Media Settings
button
MENU
to open the
System
Settings
»
49