1
Press SOURCE, and select the AUX mode to listen to
the portable device.
Portable player, etc.
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs).
Note
• If a USB Memory is directly connected to the USB terminal, the size or
shape may interfere with driving operations, therefore, avoid connecting
an AUX input terminal and a USB Memory at the same time.
16
Downloaded from Caradio-Manual.com Manuals
-EN
Main unit
or
SETUP
Rotary encoder (AUDIO)
FUNC./SETUP
SOURCE/
/SOUND
/ENT
* The illustrator is for CDE-114BTi.
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc., can be modified.
Use steps 1 to 4 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
1
Press and hold FUNC.SETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired SETUP
menu, and then press ENT.
(e.g. Select SUBWOOFER)
*1
PLAY MODE INT MUTE
BT IN
*3
*4
AUX NAME
POWER IC DEMO SUBWOOFER
NAME
*5
SUBW SYS
ILLUMINATI
*7
FM-LEVEL REGIONAL
PI SEEK
*1 Displayed only when INT MUTE is set to OFF, and the mode is
set to other than BT AUDIO.
*2 Displayed only when BT IN is OFF.
*3 Displayed only when AUX+ SETUP is ON.
*4 CDE-112Ri/CDE-113BT/CDE-114BTi only.
*5 Displayed only when SUBWOOFER is ON.
*6 CDE-112Ri/CDE-113BT only.
*7 Refer to "Receiving RDS Regional (Local) Stations" on page 9.
*8 Refer to "PI SEEK Setting" on page 9.
3
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press and hold FUNC.SETUP for at least 2 seconds to
return to normal mode.
Notes
• Press SOUND to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
*2
AUX+ SETUP AUX+
*6
SCROLLTYPE TEXT SCR
*8
LANGUAGE BT IN