Grandstream Networks DP720 Administration Manual page 50
Hide thumbs
Also See for DP720:
- User manual ,
- Quick start manual (68 pages) ,
- Quick installation manual (18 pages)
Table of Contents
Advertisement
Date and Time
Defines URL or IP address of the NTP (Network Time Protocol) server. Used by the base to
NTP Server
synchronize the date and time. A list of public NTP servers can be found at
NTP Update
Contacts NTP server at specified period of time (in minutes) to obtain the date and time. Default
Interval
is 60 minutes.
Allow DHCP
Obtains NTP server address from a DHCP server using DHCP Option 42; it will override
configured NTP Server. If set to "No", the base will use configured NTP server to synchronize
Option 42 to NTP
Server
time and date even if a NTP server is provided by DHCP server. Default is Yes.
Selects time zone to define date/time on the base.
Time Zone
Allows users to define their own time zone.
Self-Defined Time
Zone
Allow DHCP
Obtains time zone setting (offset) from a DHCP server using DHCP Option 2; it will override
selected time zone. If set to "No", the base station will use selected time zone even if provided
Option 2 to
override time
by DHCP server. Default is Yes.
zone
Syslog
Syslog Server
Sets IP address or URL of system log server. The server collects system log information from
the base station.
Syslog Level
Selects log level; the level is one of DEBUG, INFO, WARNING, ERROR (default is NONE).
. Syslog messages are sent based on the following events:
The Syslog uses USER facility. In addition to standard Syslog payload, it contains the following
components: GS_LOG: [device MAC address][error code] error message
Example: May 19 02:40:38 192.168.1.14 GS_LOG:[00:0b:82:00:a1:be][000] Ethernet link is up
1.
product model/version on boot up (INFO level)
2.
NAT related info (INFO level)
3.
sent or received SIP message (DEBUG level)
4.
SIP message summary (INFO level)
5.
inbound and outbound calls (INFO level)
6.
registration status change (INFO level)
7.
negotiated codec (INFO level)
8.
Ethernet link up (INFO level)
9.
SLIC chip exception (WARNING and ERROR levels)
10. memory exception (ERROR level)
DP750/DP720 Administration Guide
http://www.ntp.org
.
P a g e
|
50
Advertisement
Table of Contents
