Grandstream Networks DP720 Administration Manual page 49

Specifies TLS private key used for SIP over TLS in X.509 format.
SIP TLS Private
Key
SIP TLS Private Specifies SSL Private key password used for SIP Transport in TLS/TCP.
Key Password
Primary RADIUS Defines primary RADIUS server for authentication, authorization and billing purposes. Primary
Server and secondary RADIUS server configuration is available to provide redundancy to this feature.
In case Primary Radius server becomes unusable, RADIUS requests will be automatically sent
to the secondary server. When at least one RADUIS server is configured, the device will allow
users to make phone calls only after authorization from RADIUS server is received. CDR (Call
Detail Record) is also sent to the RADIUS server for billing purposes. RAIDUS server can send
requests to terminate calls when run out of pre-paid credit.
Primary RADIUS Uses specified port for authentication with the primary RADIUS server. Default is 1812.
Authentication
Port
Primary RADIUS Specifies port to be used for the primary RADIUS account. Default is 1813.
Account Port
Primary RADIUS Enters secret string to be used to authenticate the RADIUS connection to the primary server. It
Server Secret should match RADIUS configuration.
Secondary Sets IP or FQDN of the secondary RADIUS server. In case primary radius server becomes
unusable, secondary will take role of primary and will manage credit resources in the network.
RADIUS Server
Uses specified port for authentication with the secondary RADIUS authentication. Default is
Secondary
RADIUS 1812.
Authentication
Port
Secondary Specifies port to be used for the secondary RADIUS account. Default is 1813.
RADIUS Account
Port
Secondary Enters secret string to be used to authenticate the RADIUS connection to the secondary server.
RADIUS Sever It should match RADIUS configuration.
Secret
RADIUS Timeout Specifies period of time before request is cancelled if no response.
Default is 2.
RADIUS Retry Specifies amount of retry attempts if RADIUS communication failure. Default is 3.
DP750/DP720 Administration Guide
P a g e | 49