Grandstream Networks DP720 Administration Manual page 33

Network Status
Shows Device ID in hexadecimal format. This is needed by network administrators for
MAC Address
troubleshooting. The MAC address will be used for provisioning and can be found on the
label on original box and on the label located on the bottom panel of the device.
IP Address Mode Indicates used IP address mode: DHCP, Static IP or PPPoE.
IP Address Displays assigned IP address. Example: 192.168.5.110
Subnet Mask Displays assigned subnet mask. Example: 255.255.255.0
Gateway Displays assigned default gateway. Example: 192.168.5.1
PPPoE Link Up Indicates PPPoE connection status.
DNS Server 1 Shows assigned DNS server address 1. Example: 8.8.8.8
DNS Server 2 Shows assigned DNS server address 2. Example: 8.8.4.4
NAT Traversal Indicates type of NAT for each Profile. (Based on STUN protocol.)
System Info
Product Model Displays product model info. Default is DP750.
Shows product part number. Example: 9610003814A (last 2 digits show HW version, in this
Part Number
example 14A for HW version 1.4A)
Software Version
System Up Time Indicates system uptime since last reboot.
System Time Shows actual time and date according to your configuration.
Service Status Reveals status of VoIP applications.

Boot: Specifies Boot version. Current is 1.0.1.14

Core: Specifies Core version. Current is 1.0.1.14

Base: Specifies Base version. Current is 1.0.1.14

Prog: Specifies Prog version. Current is 1.0.1.14. This is the main firmware
release number, which is always used for identifying the software system of the
DP750.

Locale: Specifies Locale version. Current is 1.0.1.14

Recovery: Specifies Recovery version. Current is 1.0.1.14
DP750/DP720 Administration Guide
P a g e | 33