Table of Contents
Advertisement
4
INSTALLATION: control panel and accessories
4.1 - Setting up the system components for configuration
Since the system components communicate wirelessly, it is best to configure
the system first on the bench and only then locate and install the devices.
For control panels which also have electrical connections, proceed as
follows:
1) configure the wireless devices on the bench;
2) mount all devices;
3) make the electrical hookup.
To avoid errors, malfunctions and reception failures, proceed as follows:
This procedure checks the radio coverage of the devices before their
installation.
a) Place all products on the bench with their packaging open;
b) Fit the "voice guide" memory card into the control panel and, for GSM ver-
sions, the SIM card as well (see installation paragraph).
Warning: The SIM card's PIN must be cancelled, along with any messages,
contacts and other resident or saved information.
Caution: 3G SIM cards are not compatible.
c) Power up the control panel and program it in device acquisition mode;
d) Insert the batteries into the devices so that the control panel can acquire
them one by one;
e) Test the operation of the various devices;
f) Place the control panel in its intended location (do not mount it there yet);
g) Place the other devices in their intended positions (again, without mounting
them yet);
h) Check that every device has sufficiently wireless reception to operate (see
"Testing the control panel");
In GSM models, check that there is sufficient reception:
i) Now install all devices in place;
l) If necessary, configure the advanced and detailed functions on the control
panel.
The following paragraphs describe the installation of the control panel (all mod-
els) and the electrical hookup of wired versions.
4.2 - Preliminary checks before installation and limitations on
use
Before proceeding with installation, check the condition of the product, suit-
ability of the selected model and conditions of the intended installation environ-
ment.
• Check that all conditions fall within the "limits of use" and "technical charac-
teristics".
• Check that the installation location is compatible with the overall clearance
of the product.
• Check that the mounting surface is solid, so that the device is mounted
securely and is protected against impact.
• Install the control panel at least 1 m off the ground.
• the product may only be used with Nice Home Security system devices.
4.3 - Description of the control panel
All control panel models have a system memory card with voice guide ("l"
fig. 6A - 6B). The guide speaks the language of this manual; other language
versions are available.
The memory card is enclosed with this manual and must be inserted into the
control unit before starting the installation, and with it powered off (see par.
4.4.1).
During programming, the card stores the system parameters (excluding vocal
messages recorded by the installer or user) and can be transferred from one
control panel to another.
Some models of control panel (HSCU1GC and HSCU1G) are equipped with a
GSM phone dialler.
The SIM card must be inserted into the control unit before starting the instal-
lation, and with it powered off (see par. 4.4.1). The SIM card may be provided
by any cellular operator and with any contract (the system only uses the voice
and SMS services), but must be configured with PIN code = "1234" or set as
"access without PIN": this can be done by inserting the SIM card in any GSM
phone.
Description of control panel:
Fig. 6A models HSCU1G and HSCU1 - Fig. 6B models HSCU1GC
a - Display
b - Keyboard
c - Microphone
d - PSTN phone socket
e - Cable entrance hole
f - PC connection socket
8
and HSCU1C:
g - Electrical terminal block (models HSCU1G and HSCU1GC)
h - Internal siren
i - Speaker
l - System memory card with voice guide
m - GSM SIM card (models HSCU1G and HSCU1GC)
n - Battery pack (models HSCU1G and HSCU1)
o - Backup battery (models HSCU1GC and HSCU1C)
p - Main power terminal clamp (models HSCU1GC and HSCU1C)
q - Power supply (models HSCU1GC and HSCU1C)
r - GSM antenna
Models HSCU1G and HSCU1
6A
r
a
b
c
d
Models HSCU1GC and HSCU1C
6B
r
a
b
c
d
e
f
q
g
f
n
m
l
i
h
p
o
m
l
i
h
Advertisement
Table of Contents
