Table of Contents
Advertisement
GROUP C WIRED TAMPER
24H PANIC AL. GROUP TAMPER
24H ROBB. AL. GROUP TAMPER
24H TECHN. AL. GROUP TAMPER
ARMING VIA USER CODE
DISARMING VIA USER CODE
REMOTE CONTROLS ACTIVATION
REMOTE CONTROLS DEACTIVATION
ACTIVATION CODES
DEACTIVATION CODES
ARMING VIA EXTERNAL KEY
DISARMING VIA EXTERNAL KEY
ARMING VIA REMOTE PHONE
DISARMING VIA REMOTE PHONE
CONTROL PANEL BATTERY
RESTORE CONTROL PANEL BATTERY
PERIPHERAL BATTERY
RESTORE PERIPHERAL BATTERY
MAINS FAILURE
MAINS RESTORATION
PERIODIC CALL
NO SUPERVISION GROUP A, B, C, T
SCANNER
OPEN DURING GROUP A, B, C ARMING
6.3.3 - GPRS: fill in the fields as follows:
INTERNET DATA
APN:
request the GPRS data connection APN from your cellular operator.
IP:
not required at this time for TIM, WIND and VODAFONE users. If a different SIM is used, request this setting from your cellular operator.
USER:
not required at this time for TIM, WIND and VODAFONE users. If a different SIM is used, request this setting from your cellular operator.
PSW:
not required at this time for TIM, WIND and VODAFONE users. If a different SIM is used, request this setting from your cellular operator.
GPRS 1-2 (first and second connection option – same procedure) – see SECURITY COMPANY DATA menu
USERNAME
enter the 4 digit number provided by the security company
TCP / UDP MODE
select the mode (p q) and confirm (OK)
IP ADDRESS
enter the IP of the security company switchboard
IP PORT
enter the IP PORT of the security company switchboard
BACK-UP SMS NUM
enter a number of the security company switchboard to which SMS's can be sent if transmission fails
PERIODIC CHECK
enter the interval (in minutes) between check transmissions
SIA 1-2 (first and second connection option – same procedure) – see MON.STAT.DATA menu
USERNAME
enter the 4 digit number provided by the security company
TCP / UDP MODE
select the mode (p q) and confirm (OK)
IP ADDRESS
enter the IP of the security company switchboard
IP PORT
enter the IP PORT of the security company switchboard
PERIODIC CHECK
enter the interval (in minutes) between check transmissions
EVENTS menu
see 6.3.1 and enable the events you require
6.3.4 - PC REMOTE MANAG
(advanced programming, without voice guide)
The control panel has a tele service feature. For this function, the control panel must be connected to the PSTN line and
the customer service must be equipped with an HSMO phone modem and
software for PC Tele Service.
The tele service feature must however be expressly activated by the user by pressing
For the settings required for tele service, see the HSMO modem's manual.
18
1 137 03 000
1 137 04 001/099
1 137 05 001/009
1 137 06 001/009
1 401 00 000
3 401 00 000
1 401 00 001/032
3 401 00 001/032
1 401 00 033/064
3 401 00 033/064
1 409 00 000
3 409 00 000
1 407 00 000
3 407 00 000
1 302 00 000
3 302 00 000
1 384 01/06 001/099
3 384 01/06 001/099
1 301 00 000
3 301 00 000
1 602 00 000
1 381 00 000
1 344 00 000
1 371 01/03 001/099
1 12
1 12
1 12
1 12
1 60
2 60
1 60
2 60
1 60
2 60
1 60
2 60
1 60
2 60
1 91
2 91
1 13
2 13
1 92
2 92
1 90
1 11
1 95
NOT USED
.
Advertisement
Table of Contents
