Speakers - HP ProBook 11 G1 Maintenance And Service Manual

Speakers

Description
Speaker Kit (includes left and right speakers, cables, and four rubber isolators)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Bottom cover (see
b. Hard drive (see
c. WWAN module (see
d. Keyboard/top cover (see
e. System board (see
Remove the speakers:
1. Release the speaker cable from the routing clip (1) built into the base enclosure.
2. Remove the two Philllips PM2.0×5.5 shoulder screws (2) that secure the speakers to
the base enclosure.
Battery on page 26), and then remove the following components:
Bottom cover on page
Hard drive on page 30)
WWAN module on page
Keyboard/top cover on page
System board on page
28)
35)
50)
57)
Component replacement procedures
Spare part number
809870-001
63