Rtc Battery - HP ProBook 11 G1 Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Bottom cover (see
b. Hard drive (see
c. WWAN module (see
d. Keyboard/top cover (see
e. System board (see
Remove the RTC battery:
1. Turn the system board upside down with the front toward you.
2. Use a flat-bladed, non-metallic tool to release the RTC battery from the socket on the system board (1).
3. Remove the RTC battery (2).
Reverse this procedure to install the RTC battery. When installing the RTC battery, make sure the "+" sign
faces up.
62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 26), and then remove the following components:
Bottom cover on page
Hard drive on page 30)
WWAN module on page
Keyboard/top cover on page
System board on page
28)
35)
50)
57)
Spare part number
616073-001