Table of Contents
Advertisement
6.
Remove the four Phillips PM2.5×5.8 screws (6) that secure the display assembly to the base enclosure.
7.
Partially open the computer.
8.
Swing the display hinges (1) to the open position.
9.
Slide the display assembly (2) forward until the display hinges are clear of the base enclosure.
10.
Remove the display assembly (3).
NOTE:
display assembly.
40
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Steps 11 through 18 apply only to computer models equipped with a non-TouchScreen
Hide quick links:
Advertisement
Table of Contents
