Detection Control Board Interface Sketch Is Shown In Fig.2; Products Parameters; Installation Of Detection Control Board - Gree GMV-PD100W/NAB-K Service Manual

DC Inverter Multi
VRF Service Manual

9.3 Detection Control Board Interface Sketch is shown in Fig.2:

The gate-control function can be realized after the detective interface of detection control board connects
with interface of gate-control card and signal interface of it connects with the mainboard.

9.4 Products Parameters

Model: MK03 gate controller
Working Voltage: AC 220-240V, 50HZ or DC +5V-+24V
Power: 1W
Working temperature: -10~48

9.5 Installation of Detection Control Board

No.
Description
( L×W×D)100mm×100mm×50mm
Note: Detection control board with (L×W×H) 73.5mm×73.5mm×33.0mm
56
Fig2: Detection Control Board Interface Sketch
Fig. 3 Installation Sketch of Detection Control Board
1
Base box of socket installed
in the wall , a hole with
2 3
Bottom plate Front panel
of detection of detection
control board control board
4
Screw M4X25