Belt Maintenance; Inspecting The Belts; Replacing The Mower Belt; Replacing The Drive Belts - Toro 74268CP Operator's Manual

With 60in or 72in turbo force side discharge mower
Hide thumbs Also See for 74268CP:
Table of Contents

Advertisement

Belt Maintenance

Inspecting the Belts

Service Interval: Every 100 hours
Check the belts for squealing when the belt is rotating,
blades slipping when cutting grass, frayed belt edges,
burn marks and cracks are signs of a worn mower belt.
Replace the mower belt if any of these conditions are
evident.

Replacing the Mower Belt

Squealing when the belt is rotating, blades slipping when
cutting grass, frayed belt edges, burn marks and cracks
are signs of a worn mower belt. Replace the mower belt
if any of these conditions are evident.
1. Disengage the PTO, move the motion control levers
to the neutral locked position and set the parking
brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Remove the belt covers (Figure 59).
4. Pull on the spring loaded idler arm to loosen the belt
tension.
5. Remove the mower belt from the mower pulleys
and the top pulley of the three stacked pulleys
(Figure 59 and Figure 60).
6. Install the new belt around the mower pulleys
and the top pulley of the three stacked pulleys
(Figure 59 and Figure 60).
7. Pull on the spring loaded idler arm to loosen the
belt tension and align the mower belt onto the idler
pulley (Figure 60).
8. Install the belt covers and close the latches
(Figure 59).
1. Three stacked pulleys
2. Mower belt
1. Belt cover

Replacing the Drive Belts

Squealing when the belt is rotating, blades slipping when
cutting grass, frayed belt edges, burn marks and cracks
are signs of a worn mower belt. Replace the mower belt
if any of these conditions are evident.
Note: Remove the top drive belt first if the bottom
drive belt needs to be replaced.
1. Disengage the PTO, move the motion control levers
to the neutral locked position and set the parking
brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Remove the rear engine panel (Figure 61).
44
Figure 59
3. Mower spindle pulley
4. Mower idler pulley
Figure 60
2. Latch

Advertisement

Table of Contents
loading

This manual is also suitable for:

7426874269cpZ590-d z master74269

Table of Contents