Table of Contents
Advertisement
Changing the Fuel Filter
Service Interval: Every 400 hours/Yearly (whichever
comes first) (more often in dirty or
dusty conditions).
Never install a dirty fuel filter if it is removed from the
fuel line.
1. Allow the machine to cool down.
2. Disengage the PTO, move the motion control levers
to the neutral locked position and set the parking
brake.
3. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
4. Close the fuel shut-off valve.
5. Loosen the two hose clamps and disconnect the fuel
lines from the fuel filter (Figure 49).
6. Install a new filter. Connect the fuel lines to the fuel
filter and install the two hose clamps.
7. Open the fuel shut-off valve.
8. Start the engine and check for leaks.
Figure 49
1. Fuel filter
2. Hose clamps
Servicing the Fuel Tank
Do not attempt to drain the fuel tank. Ensure that an
Authorized Service Dealer drains the fuel tank and
services any components of the fuel system.
3. Right side of machine
Electrical System
Maintenance
Servicing the Battery
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harm.
Wash hands after handling.
Battery electrolyte contains sulfuric acid which
is a deadly poison and causes severe burns.
Do not drink electrolyte and avoid contact with
skin, eyes or clothing. Wear safety glasses to
shield your eyes and rubber gloves to protect
your hands.
Removing the Battery
Battery terminals or metal tools could short
against metal machine components causing
sparks. Sparks can cause the battery gasses to
explode, resulting in personal injury.
• When removing or installing the battery, do
not allow the battery terminals to touch any
metal parts of the machine.
• Do not allow metal tools to short between
the battery terminals and metal parts of the
machine.
37
Warning
Advertisement
Table of Contents
