Table of Contents
Advertisement
Product Overview
1. Lift assist lever
2. Height-of-cut lever
3. Motion control levers
4. Roll bar
5. Seat belt
Controls
Become familiar with all the controls before you start the
engine and operate the machine (Figure 3 and Figure 4).
1. Ignition switch
2. Throttle control
3. Glow plug light
4. Power take off (PTO)
Switch
Figure 3
6. Controls
7. Fuel cap (both sides)
8. Parking brake lever
9. Caster wheel
10. Mower deck
Figure 4
5. Hour meter
6. Fuel cap
7. Volt meter
8. Engine Temperature
gauge
Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running.
Use these times for scheduling regular maintenance
(Figure 4).
Glow Plug Light (Orange Light)
The glow plug indicator light turns on when the ignition
switch is turned to the on position. When the light turns
off, the engine is ready to be started (Figure 4).
Temperature Gauge
The temperature gauge registers the temperature of the
coolant in the cooling system (Figure 4).
Audible Alarm
This machine has an audible alarm that alerts the user
to turn off the engine or engine damage can occur from
over heating. Refer to Servicing the Cooling System in
Cooling System Maintenance , page 41.
Volt Meter
The volt meter registers the output of the charging
system (Figure 4).
13
Advertisement
Table of Contents
