Maintenance; Recommended Maintenance Schedule(S) - Toro 74268CP Operator's Manual

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 25 hours
After the first 50 hours
Before each use or daily
Every 25 hours
Every 40 hours
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 400 hours
Every 500 hours
Every 600 hours
Yearly
Important: Refer to your
Maintenance Procedure
• Check cooling system level.
• Check the hydraulic fluid.
• Change the hydraulic filter.
• Change the engine oil.
• Change the engine oil filter.
• Check the safety system.
• Check the engine oil.
• Check cooling system level.
• Clean the cooling system.
• Check the mower blades.
• Clean the mower deck.
• Grease the mower deck and spindles.
• Grease the mower belt idler arm.
• Grease the pump belt idler arm.
• Grease the drive belt idler arm.
• Grease the brake lever.
• Check the hydraulic fluid.
• Drain the water separator.
• Check the tire pressure or monthly, whichever occurs first.
• Check the pump drive belt.
• Check the alternator belt.
• Change the engine oil.
• Check the wheel hub slotted nut.
• Check the cooling system hoses.
• Inspect the belts for cracks and wear.
• Check the hydraulic hoses.
• Lubricate the machine with light oil.
• Replace the primary air filter.
• Change the engine oil filter.
• Grease the brake pivot.
• Replace the fuel filter (more often in dirty or dusty conditions).
• Adjust the caster pivot bearing or at storage, which ever comes first.
• Replace the fan hydraulic filter
• Replace the safety air filter.
• Grease the front caster pivots (more often in dirty or dusty conditions).
• Change the engine coolant.
• Change the hydraulic filter and oil.
Engine Operator's Manual
for additional maintenance procedures.
30