EcoWater ETF AIV-10 Owner's Manual page 15

ECOWATER
S Y S T E M S
7. To return to the present time display, press the
SELECT button. If the model code was
changed, make all controller settings.
NOTE: If the electronic control is left in a diagnostic
display (or a flashing display when setting
times or hardness), present time automatically
returns if a button is not pressed within 4 min-
utes.
Position markers
(valve in service)
CAM
S
SERVICE
Position Switch
BW
BACKWASH
Position Switch
A
ASPIRATE
Position Switch
RESETTING TO FACTORY DEFAULTS
To reset the electronic controller to its factory default
for all settings (time, days between recharges, etc.):
1. Press the SELECT button and hold it until the dis-
2. Press the
3. Press the SELECT button, and the electronic con-
MOTOR
4. Set the present time, days between recharges,
FIG. 31
Valve Cam
FIG. 32
Valve Cam
FIG. 33
Valve Cam
FIG. 34
15
Troubleshooting
play changes twice to show "CODE" and the flash-
ing model code.
UP button (a few times, if necessary)
to display a flashing "SoS".
troller will restart.
etc., as described on pages 10 & 11.
(continued)
FIG. 35