Sony HAP-Z1ES User Manual page 107

When the remaining time until the HDD AUDIO PLAYER enters the standby mode is less
than 60 seconds, the remaining time is shown on the screen.
When the HDD AUDIO PLAYER is in standby mode, you can start the HDD AUDIO PLAYER
by pressing the
PLAYER, or by operating HDD Audio Remote (only when the HDD AUDIO PLAYER is in
Network Standby mode).
Setting the Sleep timer (Sleep)
You can set the Sleep timer. When the specific time you set has elapsed, the HDD AUDIO
PLAYER is automatically turned off.
1. Select [Settings] - [System Settings].
2. Select [Sleep].
3. Set the specific time until the Sleep timer function activates from [Off] (factory default
setting), [00:10], [00:20], [00:30], [00:40], [00:50], [01:00], [01:30] or [02:00].
Note
The Auto Standby function that automatically turns the HDD AUDIO PLAYER off does not
work after you set the Sleep timer.
If the HDD AUDIO PLAYER is set to Network Standby mode, you can operate it through
HDD Audio Remote even after the HDD AUDIO PLAYER has been turned off after the
specific time you set has elapsed.
The Sleep timer is canceled if one of the following operations is performed after setting the
Sleep timer:
A software update is started.
Formatting of the hard disk drive is started.
Rescanning of the hard disk drive is started.
The HDD AUDIO PLAYER is manually turned off.
The product is reset. (The factory reset function is performed.)
The Sleep timer is set to off.
Hint
When the remaining time until the sleep timer activates is less than 60 seconds, the
remaining time is shown on the screen.
You can set the Sleep timer from the Playback Options menu while playing a track.
button or button on the remote control or the HDD AUDIO