Method 3. Setting Up A Network Connection By Adding A New Access - Sony HAP-Z1ES User Manual

key (WEP key or WPA key) manually without using the WPS method.
Confirm the network name (SSID) and security key (WEP key or WPA key) of your wireless
LAN router/access point in advance, then refer to the following link for details.
Method 3. Setting up a network connection by adding a new access point
If your wireless LAN router/access point supports the (WPS) PIN
code configuration method
If an access point supports the (WPS) PIN (Personal Identification Number) code connection,
you can set up a wireless connection by entering the (WPS) PIN code of the HDD AUDIO
PLAYER into the wireless LAN router/access point.
Confirm the operations of your wireless LAN router/access point, then refer to the following link
for details.
Method 4. Setting up a network connection using the (WPS) PIN code
configuration method
[28] Wi-Fi network connections (wireless LAN)
Method 1. Setting up a network connection using the WPS
push button configuration method
If your wireless LAN router/access point has a WPS button, you can easily connect the HDD
AUDIO PLAYER to a Wi-Fi (wireless LAN) network.
If your wireless LAN router has an AOSS button or other easy setup button, it may support
WPS. Check the operation manual of your wireless LAN router/access point for details.
1. Select [Settings] - [Network Settings] - [Internet Settings].
2. Select [Wireless Setup].
3. Select [Wi-Fi Protected Setup (WPS)].
4. Select [Start] and then press the WPS button on your wireless LAN router/access point.
The HDD AUDIO PLAYER starts searching for the access point.
5. When the connection is made, confirm the registration completion message that appears
on the screen and then select [Next].
6. When the network setup is completed, select [OK] on the screen.