Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents ...2 Important safeguards ...3 Accessories...4 Installation/connection...5...
Important safeguards Read carefully through this manual to familiarize yourself with this high-quality sound system. The beginning of operation is the moment of the unit installation. Before use the device in winter it is recommended to heat up the passenger compartment during 20 seconds or to the operation temperature. Use the unit with the temperature that goes beyond the operation temperature greatly decreases the operation resource of the screen and other components of device and can result an outage.
Accessories Receiver Remote controller Panel protective case AV cable USB cable ISO cable Mounting parts: Release keys Screw Bolt Washer Mounting strap Rubber Consumer information Warranty card Instruction manual 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc 2 pc 1 pc 4 pc...
Installation/connection Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring and make sure that the unit works properly. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
Page 6
1. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no obstacles (wires, dashboard elements, etc) for the unit installation. 2. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the sleeve in place.
Page 7
Trim frame installation To install the trim frame, press it to the unit body and push it to fix it in place. This should be done before installing the front panel; otherwise you are not able to install the trim frame. When the trim frame being installed, the side with the groove should face down and fixed first.
Page 8
Attaching the control panel 1. Insert the right side of the control panel into the main unit (pic. 3). 2. Press the control panel on to the left side of middle of it until a “click” sound is heard (pic. 4). Caution: Do not insert the control panel from the left side.
Page 9
Electrical connection Caution: For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car dealer before installing this unit. Notes: 2 cable is connected to a Hands-Free device (not included).
Page 10
The parking wire is connected with brake signal; for safety, the programs can be seen on the monitor after braking the car.
Page 14
Changing the battery 1. Pull out the battery tray. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing upward. 2. Insert the battery tray into the remote control. Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately.
General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press OPEN button on the panel to open the panel and press RESET button to restore the unit to the original factory settings.
Page 16
Setting other characteristics During TUNER mode press SEL button and hold for 2 seconds, shortly and repeatedly press SEL button to select the setting: TA SEEK => PI MUTE => RETUNE L => MASK DPI =>TA VOL => EON TA => DISP REV =>...
Page 17
Turning the sound off Press MUTE button on the RC or PWR/MUTE button on the unit to turn the sound off. Press it again or press VOL+/- buttons on the RC or rotate VOL knob on the panel to turn the sound on. Mode setting Press MODE/REJECT CALL button on the panel or MODE button on the RC repeatedly to select: TUNER =>...
Digital tuner operations Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. RDS overview PI: Program Identification Code – for identifying code. PS: Program Service Name Broadcast –...
Page 19
Hold a preset button (1-6), which you want store the station for at least 2 seconds. To recall a station: Select a band (if needed) Press a preset button (1-6) briefly to recall the stored station. AF/MONO button Press AF/MONO button to enable AF mode. Press and hold AF/MONO on the unit or press ST/MO on the RC to choose MONO or STEREO.
Page 20
The RDS program will be automatically searched and received. After turning on, if the RDS signal is weak or even no signal, the unit will search another frequency with this RDS program. Default setting is ON. PTY (Program Type) function 1.
Disc glossary PBC (PlayBack Control) PBC is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image.
DVD/SD/MMC/USB operations Discs for playback This unit can play disc types: DVD/DVD±R/±RW/CD/CD-R/CD-RW. Compatible with formats: DVD/SVCD/VCD/DVD Audio/CDDA/MP3/CD/WMA/ HDCD/Picture-CD/ Photo-CD/JPEG. The following file types are supported: Audio files: MP3 (*.mp3) WMA (*.wma) Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob) MPEG 1(*.dat) Picture file: JPEG (*.jpg) ISO 9660 or ISO 9660 +Joliet format - Max.
Page 24
Loading/Ejecting a disc Turn the power on. Press OPEN button on the panel. Insert the disc with the printed side facing upward into the slot. Press EJECT button on the inner side to eject the disc. Inserting the SD/MMC card/USB device Insert the MMC/SD card or USB device into MMC/SD compartment or USB socket.
Page 25
DIR+/DIR- Press 5/DIR-, 6/DIR+ buttons to choose folder. Loudness Press and hold BAND/LOUD button on the panel or DSP button on the RC to turn loudness on or off. Repeat playback Press RPT button on the panel or P.SCN/RPT button on the RC to start repeat playing. Press one more time to cancel.
Page 26
Selecting subtitle language (for DVD only) Subtitle language is in disc initiation setting during playback. Press SUB-T button on the RC repeatedly to switch among disc-supported languages. Changing size (for DVD/VCD) During playback press and hold A-B/ZOOM button on the RC. The picture will be enlarged accordingly: X2=> X3=>...
Page 27
2. If the menu consists of a list of titles, you can select a desired one using cursor buttons or number buttons on the RC while PBC is off. 3. The VCD starts playing the selected title automatically, or you can press PLAY/PAUSE button to confirm the selected track for playback.
Page 28
mode for front zone, and at the same time DVD mode will be playing at the rear zone (in case of correct connection). Random In disc mode press and hold BAND/RDM button on the RC or RDM button on the unit to activate random playing mode.
MP3 overview Notes on MP3: MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard. This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs. The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3 data written by the method of packet write.
Page 30
Notes on creating your own CD-R or CD-RW containing MP3 files: To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHz and a fixed bit rate o f 128 kbps. DO NOT store more than 256 MP3 files per disc. For ISO 9660 - compliant format, the maximum allowable depth of nested folders is 8, including the root directory (folder).
DVD setup Press SETUP button to enter the OSD setting menu; press LEFT/RIGHT cursor buttons to move to the highlighted menu item and select one of the setup pages: Language, Display, Audio, Parental. Press UP/DOWN cursor buttons to select an item in the selected setup page. Press RIGHT button to move to the option list of the selected item.
Page 32
Display setup TV display Three screen ratio modes are available, Normal/PS (4:3 Pan Scan), Normal/LB (4:3 Letterbox) and Wide (16:9). Different disc formats will display different images depending this setting and the screen size used. TV type Select this menu item to set up your preferred video output format. PAL is commonly used in Europe.
Page 33
Dynamic setup This function is to adjust the linear compression rate to obtain the different compression results of the signals. Standard set to OFF. Parental Change With this option you can change your password. The default password is 0000 Parent For DVD discs that support this function, parents can prohibit watching content that might be inadvisable for children (use LEFT/RIGHT cursor buttons to choose rating code, then enter password to confirm).
Bluetooth operation (option) Feature: 1. Bluetooth specification V2.0 EDR compliant 2. Support HFP, A2DP, AVRCP. 3. Excellent ECHO cancellation with noise elimination 4. Dial 5. Display incoming and outgoing number 6. Call list 7. Phone book Pairing Before operation it needs to pair the mobile phone and receiver. Prepare your mobile phone for bluetooth connection.
Page 35
Call list/number redial Short press ACCEPT CALL button once, the LCD screen will blink with “_” first, press it again to display the last number, then press NEXT/PREV button to display all incoming and outgoing numbers one by one. Press SEL button on panel or LEFT cursor button on the RC to delete a wrong number (max.
Page 36
Phone book (Max store 250 numbers) Press ACCEPT CALL button “ English letter A, press PREV/NEXT button to display all the letters A-Z (represent the first letter of the call card name) and “*” (represent the first letter other than A-Z) one by one, then press ACCEPT CALL button “...
Handling discs Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high temperature or dust.
Troubleshooting guide Symptom No power Disc cannot be loaded. Disc cannot be read. (LCD shows “ERROR2”) SD/MMC cannot be read. (LCD shows “ERROR8”) USB cannot be read. (LCD shows “S-STOP”) No sound The buttons do not work. Sound skips. Cause The car ignition is not on.
Page 39
The radio does not work, The antenna cable is not connected the radio station automatic the signals are too weak. selection does not work. Insert the antenna cable firmly select a station manually.
Specification General Power supply: Storage support: Compatible with: Current consumption: Maximum power output: Dimensions (L x W x H): Working temperature range: FM Stereo Radio Frequency range: Usable sensitivity: Preset memory stations: MW (AM) section Frequency range: Preset memory stations: Frequency response: S/N ratio (A-vtd): DSP sound effect:...
Page 60
AF/MONO AF/MONO 1-6. S/PS (18 FM 12 AM (MW)). PREVIOUS/NEXT. ST/MO S/PS P.SCN/RPT (1-6), (1~6). P.SCN/RPT...
Page 61
TA ( AF ( AF/MONO «AF». PTY ( PTY/SCN : MUSIC ( PTY. POP M, ROCK M EAST M, LIGHT M CLASSICS, OTHER M JAZZ M, COUNTRY M /DSP PROG/PTY ) => SPEECH ( ) => (1-6), NEWS, AFFAIRS, INFO SPORT, EDUCATE, DRAMA CULTURE, SCIENCE, VARIED WEATHER, FINANCE, CHILDREN...
Page 62
NATION M, OLDIES M FOLK M PTY/SCN PTY. SOCIAL, RELIGION, PHONE IN TRAVEL, LEISURE, DOCUMENT PROG/PTY...