Preference Menu; Volume Setup Sub-Menu; Headphones Level Sub-Menu; Late Night Setup Sub-Menu - Onkyo TX-DS696 Instruction Manual

Setup menus

4. Preference menu

Menu
1.Speaker Setup
4.Preference 4.Preference 4.Preference 4.Preference
2.Input Setup
3.Listening Mode Setup
4.Preference
1.Volume Setup 1.Volume Setup 1.Volume Setup 1.Volume Setup
5.OSD Setup
2.Headphones Level 2.Headphones Level 2.Headphones Level 2.Headphones Level
3.DTS LFE Level Setup 3.DTS LFE Level Setup 3.Late Night Setup
4.AM Frequency Setup 4.Powered Zone2 Setup 44.Powered Zone2 Setup
4.AM Freq Step Setup
|ENTER| Quit:|OSD|
|ENTER|Quit:|SETUP| |ENTER| Quit:|OSD| |ENTER| Quit:|OSD| |ENTER| Quit:|OSD|
Menu
1.Speaker Setup
4.Preference
2.Input Setup
3.Listening Mode Setup
4.Preference
1.Volume Setup 4-1.Volume Setup
5.OSD Setup
2.Headphones Level
3.DTS LFE Level Setup
4.Powered Zone2 Setup a.Maximum Volume
b.Power on Volume
|ENTER| Quit:|OSD|
|ENTER| Quit:|OSD|
Menu
1.Speaker Setup
4.Preference
2.Input Setup
3.Listening Mode Setup
4.Preference
4-2.Headphones Level 1.Volume Setup
5.OSD Setup
2.Headphones Level
3.DTS LFE Level Setup
4.Powered Zone2 Setup a.Headphones Level
|ENTER| Quit:|OSD|
|ENTER| Quit:|OSD|
Menu
1.Speaker Setup
4.Preference
2.Input Setup
3.Listening Mode Setup
4.Preference
1.Volume Setup 4-3.Late Night Setup
5.OSD Setup
2.Headphones Level
3.DTS LFE Level Setup
4.Powered Zone2 Setup a.Late Night
|ENTER| Quit:|OSD|
|ENTER| Quit:|OSD|
42
:Off
:Last
Quit:|SETUP|
: 0dB
Quit:|SETUP|
:Low
Quit:|SETUP|

4-1. Volume Setup sub-menu

This sub-menu allows you to make various settings concerning the
volume control of the TX-DS696.
a. Maximum Volume
This setting allows you to set the maximum volume that can be
output with the MASTER VOLUME dial to prevent components
from being damaged by excessively loud volumes. The maximum
volume can be set between 30 and 79.
b. Power On Volume
This sets a designated volume setting for the TX-DS696 to be set
every time that the power is turned on. This prevents the TX-DS696
from being turned on while it is set to an extremely high volume and
suddenly output very loud sounds. The power on volume can be set
between min and max. If you do not mind having the TX-DS696
turned on with its current volume setting, set this to "Last."

4-2. Headphones Level sub-menu

a. Headphones Level
You can use this sub-menu to adjust the volume output from the
headphones so that it matches the level output from the speakers.
The headphone volume can be adjusted between –12 and +12
decibels.

4-3. Late Night Setup sub-menu

a. Late Night
Sets "High," "Low," or "Off" for the late night function.
Cinema sound has a vast dynamic range; therefore, to hear the
quieter sounds such as human conversations, they must be played
back at larger volumes. When this parameter is set to "High" or
"Low," the dynamic range of the sound is narrowed down to allow
you to easily hear minute sounds at low volumes. This function is
especially useful if you wish to play a movie at low volumes during
the nighttime.
Notes:
• The depth of the Late Night effect is determined by Dolby
Digital software. Some sounds may produce no or little effect.
• The Late Night function is effective only on Dolby Digital
encoded software.

4-4. AM Freq Step Setup sub-menu

(Worldwide model only)
a. AM Frequency Step
This submenu only appears on the worldwide model. The initial
setting is 9 kHz, and this needs only to be changed if you are using
the TX-DS696 in a 10-kHz region.
Menu
1.Speaker Setup
4.Preference
2.Input Setup
3.Listening Mode Setup
4.Preference
4-4.AM Freq Step Setup 1.Volume Setup
5.OSD Setup
2.Headphones Level
3.DTS LFE Level Setup
4.Powered Zone2 Setup a.AM Frequency Step
|ENTER| Quit:|OSD|
|ENTER| Quit:|OSD|
: 9kHz
Quit:|SETUP|