Speaker Distance Submenu - Onkyo TX-DS696 Instruction Manual

Speaker setup
5. Press the jog once and then turn it
to set the size of your front
speakers.
Large: Select if the front speakers are large
sized.
Small: Select if the front speakers are small
sized.
• If "No" is selected for the Subwoofer setting, then this
setting is fixed to "Large".
6. Press the jog once and then turn it
to set whether or not a center
speaker is connected and, if one is
connected, its size.
None: Select if no center speaker is
connected.
Large: Select if the center speaker is large
sized.
Small: Select if the center speaker is small
sized.
• If "small" is selected for the Front setting, then "Large"
cannot be selected for this setting.
7. Press the jog once and then turn it
to set whether or not surround
speakers are connected and, if they
are connected, their size.
None: Select if no surround left and right
speakers are connected.
Large: Select if the surround left and right
speakers are large sized.
Small: Select if the surround left and right
speakers are small sized.
• If "small" is selected for the Front setting, then "Large"
cannot be selected for this setting.
Pressing the jog dial again returns you to the subwoofer setting.
8. Press the RETURN button.
You return to the "Speaker Config?" display.
Notes:
• If you press the RETURN button again, you go back up one
more level.
• To exit the setting mode immediately, press the SETUP button.
DSP / MODE ADJ

Speaker Distance submenu

This submenu provides settings that tell the TX-DS696 how far
PUSH TO ENTER
away your speakers are located from the listening position so that it
can provide the optimum sound space. If you are continuing from
setting the speaker configuration and are still in the setting mode,
skip directly to step 2.
DSP / MODE ADJ
1. Press the SETUP button.
If a menu other than "1. Speaker Setup"
appears, turn the jog dial until "1. Speaker
PUSH TO ENTER
Setup" does appear.
DSP / MODE ADJ 2. Press the jog dial and then turn it to display the
"Speaker Distance."
PUSH TO ENTER
DSP / MODE ADJ
3. Press the jog dial and then turn it to
select the unit of measurement.
PUSH TO ENTER
feet: Select if you will enter the distances in
DSP / MODE ADJ
feet.
meters: Select if you will enter the distances
in meters.
PUSH TO ENTER
4. Press the jog dial and then turn it to
set the distance from the front
speakers to the listening position.
DSP / MODE ADJ
PUSH TO ENTER
5. Repeat the procedure in step 4 to set the distance
from the center speaker and the surround speakers
to the listening position.
RETURN
6. Press the RETURN button.
You return to the "Sp Distance?" display.
Notes:
• If you press the RETURN button again, you go back up one
more level.
• To exit the setting mode immediately, press the SETUP button.
DSP / MODE ADJ DSP / MODE ADJ
PUSH TO ENTER PUSH TO ENTER
SETUP
DSP / MODE ADJ
PUSH TO ENTER
DSP / MODE ADJ
PUSH TO ENTER
DSP / MODE ADJ
PUSH TO ENTER
ft
DSP / MODE ADJ
PUSH TO ENTER
RETURN
23