Controlling An Onkyo Dvd Player - Onkyo TX-DS696 Instruction Manual

Using remote controller
ON
RETURN
ENTER/Cursor
button
DISC
TOP MENU
AUDIO
ANGLE
HOME THEATER CONTROLLER
48
STDBY
DVD MODE
SETUP
VOL
MENU
MUTING
SUBTITLE
DVD
operation
buttons
Numeric keys
SEARCH
RC-440M

Controlling an Onkyo DVD player

The z connector of the Onkyo DVD player must be connected to
the TX-DS696 (see page 16).
1. Press the DVD MODE button.
The DVD MODE button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Onkyo DVD player.
Operation buttons:
ON: Turns the DVD player on and off
STDBY: Turns the DVD player off. (Some sets may not respond to
this button. In this case, use the ON button to put the DVD player in
the standby state.)
SETUP: Displays the menu
: Moves the cursor
ENTER: Confirms the selection
RETURN: Return button
TOP MENU or MENU: Displays the menu screen(s) recorded on
DVD media.
DISC : Selects a disc in the DVD changer.
AUDIO: Press repeatedly to select an audio and/or language track
recorded on a DVD-Audio/Video.
ANGLE: Press repeatedly to select a camera angle when a DVD-
Video is recorded with multiple angle playback.
SUBTITLE: Press repeatedly to select one of the subtitle languages
recorded on a DVD-Video.
SEARCH: Press to find the specific section on a disc where you
want to start playback.
RANDOM/R: Press to start random playback.
: Chapter/Track down
: Chapter/Track up
: Play
: Stop
: Fast reverse
: Fast forward
: Pause
OPEN/CLOSE r: Open/close the disc tray
0, 1 to 9, +10: Numeric keys
You may also use the following buttons:
VOL : Adjusts the volume at the TX-DS696
MUTING: Activates the muting function at the TX-DS696
Note:
When operating an Onkyo DVD player directly with the remote
controller without connecting the z terminals, pre-programming is
necessary (see page 50).