Preference; Preference Menu; Volume Setup Sub-Menu - Onkyo Integra TX-DS898 Instruction Manual

Preference

4. Preference menu

Advanced Menu
4.Preference
1.Volume Setup
2.Headphones Level
3.OSD Setup
4.OSD Position
|ENTER|Quit:|SETUP|

4-1. Volume Setup sub-menu

This sub-menu allows you to make various settings concerning the
volume control of the TX-DS898.
Advanced Menu
4.Preference
4-1.Volume Setup
a.Volume Display
:Absolute
b.Muting Level
c.Maximum Volume
d.Power On Volume
Quit:|SETUP|
a. Volume Display
You can choose from two ways of displaying the volume setting on
screen.
Absolute: This displays the volume with a minimum of min (0)
for no sound and a maximum of max (100). As a reference, the
volume setting of Ref (82) is used as the 0-decibel for the
relative display method.
Relative: This displays the volume as a decibel value on a scale
with a designated reference point that is displayed as 0, which
equals the volume setting of 82 for the absolute display method.
With this display method, the minimum value is –∞, the next
highest is –81, and the maximum value is +18.
b. Muting Level
This sets the attenuation level during playback when the MUTE
button is pressed on the remote controller. This can be set between –
∞, –50 and –10 decibels in 10-decibel increments.
c. Maximum Volume
This setting allows you to set the maximum volume that can be
output with the MASTER VOLUME dial to prevent components
from being damaged by excessively loud volumes. For the absolute
volume display method, this can be set between 50 and 99. For the
relative volume display method, this can be set between –32 and +17
decibels. To not set a maximum volume, select "Off."
d. Power On Volume
This sets a designated volume setting for the TX-DS898 to be set
every time that the power is turned on. This prevents the TX-DS898
from being turned on while it is set to an extremely high volume and
suddenly output very loud sounds. For the absolute volume display
method, this can be set between min and max. For the relative
volume display method, this can be set between –∞ and +18
decibels. If you do not mind having the TX-DS898 turned on with its
current volume setting, set this to "Last."
:-oodB
:Off
:Last
47