Remote Controller; Using Remote Controller; Overview; Calling Up A Preset Radio Station - Onkyo TX-DS696 Instruction Manual

Using remote controller

RCVR MODE
CH
RCVR MODE
HOME THEATER CONTROLLER
46
TUN
VOL
MUTING
TAPE
operation
buttons
RC-440M

Overview

The RC-440M remote controller is a useful tool to help you operate
the components of your home theater. To do so, first press the Mode
button that corresponds to the device you wish to control. Then
simply press the desired operation button and the component will
operate accordingly. For example, if you wish to select the CD input
source at the TX-DS696 with the remote controller, first press the
RCVR MODE button to select the TX-DS696 and then press the CD
(INPUT SELECTOR) button.

Calling up a preset radio station

1. Press the RCVR MODE button.
The RCVR MODE button lights green.
2. Press the TUN input selector button.
3. Press the CH or button to select the desired
preset station number.

Controlling an Onkyo cassette tape deck

The z connector of the Onkyo cassette tape deck must be
connected to the TX-DS696 (see page 16).
1. Press the RCVR MODE button.
The RCVR MODE button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Onkyo cassette tape deck.
Operation buttons:
: Play
: Stop
: Rewind
: Fast forward
: Press during playback to skip to the beginning of the next track.
: Press during playback to skip to the beginning of the current
track.
R (Rec): Record/Pause
: Reverse playback
You may also use the following buttons:
VOL : Adjusts the volume at the TX-DS696
MUTING: Activates the muting function at the TX-DS696
Note:
Even for devices with the
may cause them not to work properly.
and buttons, signal discrepancies