Brother FAX-170 Service Manual page 118

Selector
No.
CCD manufacturer setting
1
2
Detection enabled time for CNG
and no tone
3
ACS* check sheet output
4
function on/off key
ACS* check sheet output
5
function
6 Registration of station ID
7
Tone sound monitoring
8
Selector 1: CCD manufacturer setting
Reserved for future variation of CCD.
Selectors 2 and 3: Detection enabled time for CNG and no tone
After the line is connected via the external telephone, the equipment can detect a CNG sig-
nal or no tone for the time length specified by these selectors. The setting specified by these
selectors becomes effective only when selector 8 of WSW20 is set to "1."
Selector 4: ACS check sheet output function on/off key
If this selector is set to "0" (Operative), the user can toggle the ACS check sheet output func-
tion on and off by pressing the 1 and 5 keys simultaneously. If it is set to "1" (Inopera-
tive), the user cannot toggle the ACS check sheet output function from the control panel so
that the setting specified by selector 5 becomes effective.
Selector 5: ACS check sheet output function
When selector 4 is set to "0," the setting specified by this selector becomes the default state
of the ACS check sheet output function. When selector 4 is set to "1," the setting specified
by this selector becomes permanently effective.
Selector 6: Registration of station ID
Setting this selector to "0" permits the registration of station ID for Austrian and Czecho ver-
sions.
Selectors 7 and 8: Tone sound monitoring
These selectors sets monitoring specifications of the tone sound inputted from the line.
WSW18
(Function setting 3)
Function
V – 30
Setting and Specifications
Fixed to 1.
No. 2 3
0 0 : 40 sec.
0 1 : 0 sec. (No detection)
1 0 : 5 sec.
1 1 : 80 sec.
0: Operative 1: Inoperative
0: ON 1: OFF
0: Permitted 1: Prohibited
No. 7 8
0 X : No monitoring
1 0 : Up to phase B at the
calling station only
1 1 : All transmission phases
both at the calling and
called stations
* ACS: Anti-curl system