LAVAZZA Pininfarina Maintenance Manual For Technical Assistance page 57

The pod enters with difficulty
and does not locate correctly.
The coffee delivery is regular
but the stroke counter fails to
signal the output.
Water leakage inside the
apparatus.
• The pod drawer is full: the
excess pods are blocked
along the discharge conduit.
The FAP press remains lowered
• The electrovalve does not
discharge.
• The stainless steel spring in
the chamber is broken.
• The jaws are blocked by an
excesss of coffee powder.
• The stroke counter is faulty.
• The connector is
disconnected.
• The electronic card is
defective.
If a leakage occurs between
the FAP press and chamber.
• Perforated membrane.
If a leakage occurs between
the chamber and the
teflon-coated plate.
• Presence of limescale.
• Membrane damaged on
the seal with the collar of
the teflon-coated plate.
If a leakage occurs between
the teflon-coated plate and the
stainless steel labyrinth:
• Damaged or pinched
rectangular gasket.
If a leakage occurs between
the stainless steel labyrinth and
the top-plate.
• Labyrinth faulty or cracked.
In the event of faults
• Remove the drawer and
clean it.
• Remove all the pods that
have fallen outside the
drawer.
• Replace the component.
• Dismantle the output unit
and undertake cleaning of
the slide-base and jaws.
• Replace the component.
• Check the electrical
connections.
• Replace the component.
• Dismantle the heater and
replace the membrane.
• Dismantle the unit, remove
the scale and replace the
membrane.
• Dismantle the unit and
replace the gasket.
• Replace the labyrinth and
gasket.
GB
53