Introduction; List Of Tools Necessary For Maintenance - LAVAZZA Pininfarina Maintenance Manual For Technical Assistance

This manual contains safety warnings , the instructions to carry out the correct maintenance and to
solve any problems, the spare parts list and the wiring diagrams.
All rights reserved by Lavazza SpA, including the right to reproduce this manual or portions thereof in any
form whatsoever.
The continuous technical development and improvement of the machine could have made modifications not
included in this manual. Read it carefully. For further information consult:
Luigi Lavazza SpA Corso Novara, 59 - 10154 Torino (Italy)
Tel. (011) 23981 - Fax (011) 2398324

LIST OF TOOLS NECESSARY FOR MAINTENANCE

To carry out maintenance on the Expresso Point the following tools are necessary.
This list is purely indicative, and does not take into account the availability on some markets of alternative or
additional tools of greater efficiency.

INTRODUCTION

Open ended 8 - 9 mm. spanner
Open ended 10 - 11 mm. spanner
Open ended 12 - 13 mm. spanner
Standard pliers
PH2 Prehensile cross-headed screwdriver
Wide-bladed screwdriver
Narrow-bladed screwdriver
Small cross-headed screwdriver
Socket spanner Ø 10 - 14 - 25 mm.
µ
Long-nosed pliers
¸
Angled long-nosed pliers
GB
29