Using The Listening Modes; Selecting Listening Modes - Onkyo TX-SR705 Instruction Manual

Using the Listening Modes

Selecting Listening Modes

See "About the Listening Modes" on page 71 for
detailed information about the listening modes.
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver/AV amplifier
with a digital audio connection (coaxial or
optical).
• Listening mode availability depends on the
format of the current input signal.
Selecting on the AV receiver/AV amplifier
PURE AUDIO
LISTENING MODE
■ [PURE AUDIO] button
This button selects the Pure Audio listening mode.
When this mode is selected, the AV receiver/AV
amplifier's display is turned off and only video sig-
nals input through HDMI IN can be output. Pressing
this button again will select the previous listening
mode.
■ [STEREO] button
This button selects the Stereo listening mode.
■ LISTENING MODE [
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
66
STEREO
]/[ ] buttons
Selecting with the Remote Controller
SURR
STEREO
PURE A
DIRECT
■ [STEREO] button
This button selects the Stereo listening mode.
■ [SURR] button
This button selects the Dolby Digital and DTS listen-
ing modes and the Neural THX Surround listening
mode.
■ LISTENING MODE [
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
■ [PURE A] button
This button selects the Pure Audio listening mode.
When this mode is selected, the AV receiver's dis-
play is turned off and only the HDMI OUT outputs
video signals.
■ [DIRECT] button
This button selects the Direct listening mode.
■ [THX] button
This button selects the THX listening modes.
■ [ALL ST] button
This button selects the All Channel Stereo listening
mode.
/
ALL ST
THX
]/[ ] buttons