Setup; Loose Parts - Toro 07280TC Operator's Manual

Setup

Note: Determine the left and right sides of the vehicle from the normal operating position.

Loose Parts

Note: Use the chart below to verify that all parts have been shipped.
Description
Wheel assembly
Wheel assembly
Washer
Dust cap
Steering wheel
Bumper
Hitch
Seat
Battery hold down
Battery hold down rod
Battery cables
Battery tray pads
Battery pad
Flange nut, 3/8 inch
Battery terminal protector spray
Cargo box
Right-hand pivot bracket
Left-hand pivot bracket
Flange head screw, 3/8 x 1 inch
Bolt, 5/16 x 3/4 inch
1
Charger
Key
Supervisor Speed Limit Switch Key
Operator's Manual
Operator Video
Parts Catalog
Predelivery Inspection Form
1
Refer to the Parts Manual for the available power cords for the voltage used in the region or country where operating the charger. Contact
your Authorized Toro Dealer to obtain the appropriate power cord.
Qty. Use
2 Installing the rear wheels
2
2
Installing the front wheels
2
1 Installing the steering wheel
1 Installing the bumper
1 Installing the hitch
2 Installing the seats
2
2
7
4 Installing the batteries
1
2
1
1
1
1 Installing the cargo box
4
1
1 Setting the charger voltage.
2 Use in the On/Off switch.
2 Use in the supervisor speed limit switch.
1 Read before operating the vehicle.
1 Watch before operating the vehicle.
1 Use for ordering replacement parts.
1 Complete and file in your customer history portfolio.
14