General Maintenance; Sound Pressure Level; Vibration Level - Toro 07280TC Operator's Manual

– Always unplug the AC power cord from the power
outlet before unplugging it from the vehicle
charging receptacle to avoid sparks.
– If during charging a battery gets hot, begins emitting
large amounts of gasses, or spews electrolyte,
immediately disconnect the charger power cord
from the power outlet. Have the vehicle serviced by
an Authorized Service Dealer before using it again.

General Maintenance

• Only permit qualified personnel to maintain, repair,
adjust, or inspect the vehicle.
• Before servicing or making adjustments to the vehicle,
stop the vehicle, set the parking brake, and remove the
key to prevent someone from accidentally starting it.
• To make sure that the entire vehicle is in good
condition, keep all nuts, bolts, and screws properly
tightened.
• Do not use open pans of flammable cleaning fluids for
cleaning parts.
• If major repairs are ever needed or assistance is
required, contact an Authorized Toro Distributor.
• To be sure of optimum performance and safety, always
purchase genuine Toro replacement parts and
accessories. Replacement parts and accessories made by
other manufacturers could be dangerous. Altering this
vehicle in any manner that may affect vehicle operation,
performance, durability, or its use, may result in injury
or death. Such use could void the product warranty.

Sound Pressure Level

This unit has an equivalent continuous A-weighted sound
pressure level at the operator ear of 67 dBA based on
measurements of identical machines per Directive
98/37/EC and amendments.

Vibration Level

This unit does not exceed a vibration level of 2.5 m/s
the hands based on measurements of identical machines per
ISO 5349 procedures.
This unit does not exceed a vibration level of 0.5 m/s
the posterior based on measurements of identical machines
per ISO 2631 procedures.
2
at
2
at
7