Correcting Sound And Picture Sync - Onkyo TX-SR304E Instruction Manual

TX-SR304_En.book Page 54 Tuesday, January 24, 2006 10:01 AM
Advanced Setup —Continued

Correcting Sound and Picture Sync

When using progressive scanning on your DVD player,
you may find that the picture and sound are out of sync.
With this setting, you can correct this by delaying the
audio signals. You can set it to 0, 20, or 40 milliseconds.
ON/STANDBY
INPUT SELECTOR
INPUT 1
V 1
SELECTOR
4
MULTI CH
7
TAPE TUNER
+ 10
--/--- DIMMER
GUIDE
TOP MENU
SP A / B
PLAYLIST
RETURN
1
Press the [RECEIVER] REMOTE
MODE button.
RECEIVER
2 Press and hold, for more than 4
seconds, the input selector but-
ton for the input source that you
V 1 V 2 V 3
want to correct.
DVD This can be the [DVD], [VIDEO 1],
[VIDEO 2], or [VIDEO 3] input
source.
3
Use the Left and Right [
buttons to set the delay to 0, 20,
or 40 milliseconds.
The previous display reappears if you
don't do anything for 5 minutes.
Note:
• This setting is not available when the Direct listening
mode is used with an analog input signal.
54
REMOTE MODE
RECEIVER
RECEIVER DVD
TAPE
C D
2 3
V 2 V 3
MD
5 6
DVD
8 9 CDR
C D
0
CLR HDD
SLEEP
CH
VOL
DISC
ALBUM
PREVIOUS
MENU
MUTING
ENTER
PLAYLIST
SETUP
]/[ ]