Onkyo TX-SR304E Instruction Manual page 35

TX-SR304_En.book Page 35 Tuesday, January 24, 2006 10:01 AM
First Time Setup —Continued
5
Use the Down [
select "Center," and then use the
Left and Right [
select Small , Large , or None .
Small: Select if the center speaker is
small.
Large: Select if the center speaker is
large.
None: Select if no center speaker is
connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
6
Use the Down [
select "Surround," and then use
the Left and Right [
tons to select Small , Large , or
None .
Small: Select if the surround speak-
ers are small.
Large: Select if the surround speak-
ers are large.
None: Select if no surround speakers
are connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
7 Press the [SETUP] button.
Setup closes.
When you want to go back up one
menu level to "SP Config," press the
SETUP
[RETURN] button.
] button to
Testing the speakers
To test that all of the speakers are working properly,
]/[ ] buttons to
press the remote controller's [TEST TONE] but-
ton.
] button to
The test tone will be output by each speaker in turn
and the name of each speaker will appear on the dis-
]/[ ] but-
play. To turn off the test tone, press the [TEST
TONE] button again.
• If the test tone is not produced by a speaker, or it's
produced by a speaker other than that shown on
the display, you may have wired the speakers
incorrectly and you should check your connec-
tions (see pages 18, 19).
• If the test tone is not produced by a speaker and its
name does not appear on the display, you may
have set the speaker settings incorrectly (see
page 34).
LISTENING MODE
STEREO SURROUND
AUDIO SUBTITLE RANDOM REPEAT
TEST TONE TEST TONE CH SEL LEVEL - LEVEL +
PLAY MODE
DISPLAY L NIGHT CINE FLTR
RC- 645 S
35