Connecting A Cassette, Cdr, Minidisc, Or Dat Recorder - Onkyo TX-SR304E Instruction Manual

TX-SR304_En.book Page 30 Tuesday, January 24, 2006 10:01 AM
Connecting Your Components —Continued
Connecting an HDD-compatible Component (Audio Only)
As of this printing, the Onkyo Remote Interactive Dock is the only HDD-compatible component available.
Connect your HDD-compatible component's
analog audio output jacks to the AV receiver's
VIDEO 3 IN L/R jacks or TAPE IN L/R jacks.
Notes:
• Connect the HDD-compatible component's
video output directly to a video input on your
TV.
• Connect the Remote Interactive Dock with an
cable (see page 31).
• Set the Remote Interactive Dock's RI MODE
switch to HDD.
• Set the AV receiver's Input Display to HDD
(see page 33).
• Refer to the Remote Interactive Dock's instruc-
tion manual.

Connecting a Cassette, CDR, MiniDisc, or DAT Recorder

Connect your recorder's audio input jacks to the AV receiver's TAPE OUT L/R jacks, and connect your
a
recorder's audio output jacks to the AV receiver's TAPE IN L/R jacks. With connection
record with the recorder.
If your recorder has a coaxial digital output jack, connect it to the AV receiver's DIGITAL IN COAXIAL jack,
b
and set the DIGITAL INPUT assignment to COAX (see page 33).
If your recorder has an optical output jack instead of a coaxial one, connect it to the AV receiver's DIGITAL IN
c
OPT 1 or OPT 2 jack and set the DIGITAL INPUT assignment to OPT1 or OPT2 (see page 33).
AV receiver
30
AUDIO
S VIDEO
OUT
OUT
L R
To TV directly
: Signal Flow
Connect one or the other
OPTICAL
OUT
c
COAXIAL
OUT
b
L
OUT
PLAY
a
R
L
IN
RED
a
R
AV receiver
Connect one or the other
, you can play and
a
: Signal Flow
Cassette recorder,
CDR, etc.