Connecting A Cd Player Or Turntable - Onkyo TX-SR304E Instruction Manual

TX-SR304_En.book Page 29 Tuesday, January 24, 2006 10:01 AM
Connecting Your Components —Continued

Connecting a CD Player or Turntable

■ CD Player or Turntable with Built-in Phono Preamp
Connect your CD player's analog audio output jacks, or your turntable with built-in phono preamp's audio output
a
jacks to the AV receiver's CD IN L/R jacks. With connection
player or turntable.
If your CD player has an optical output jack, connect it to the AV receivers DIGITAL IN OPT 2 jack.
b
If your CD player has a coaxial output jack instead of an optical one, connect it to the AV receiver's DIGITAL
c
IN COAXIAL jack, and set the DIGITAL INPUT assignment to COAX (see page 33). Coaxial connections
perform the same as optical ones.
AV receiver
■ Turntable (MM) with no Phono Preamp Built-in
A phono preamp is necessary to connect a turntable that
doesn't have a phono preamp built-in.
AV receiver
AUDIO
OUTPUT
IN
L
R
CD
AUDIO
OUTPUT
L
R
Connect one or the other
Phono preamp
L
R
AUDIO
INPUT
L
R
, you can listen to and record audio from the CD
a
b
OPTICAL
OUT
COAXIAL
OUT
c
L
AUDIO
OUT
a
R
built-in phono preamp
■ Turntable with an MC (Moving Coil) Cartridge
An MC head amp and phono preamp are necessary to
connect a turntable with an MC (Moving Coil) cartridge.
AV receiver
AUDIO
OUTPUT
IN
L L
R R
Phono
CD
preamp
: Signal Flow
CD player
or
Turntable (MM) with
AUDIO AUDIO
INPUT OUTPUT
L L
R R
MC head amp or
MC transformer
AUDIO AUDIO
OUTPUT INPUT
L L
R R
29