TrainMaster Command operations
StationSounds command table
Trigger
(In motion for less than 1.5 minutes)
(In motion for more than 1.5 minutes)
(In motion for more than 3 minutes)
Table 2. StationSounds Command table
Some functions described above require you to press two keys in sequence, using the AUX1 button
as a "prefix" before the numeric key. Pressing the same numeric key without the "prefix" will
produce a different function. If you have pressed the AUX1 button for other reasons (e.g., to open
the keypad on your CAB-1 Remote Controller), you can still trigger a "non-prefixed" function by
pressing the number 6 (the unassigned numeric key) before triggering your desired function.
Also note that pressing the number 2 by itself immediately after you have played a Station Arrival
Announcement will make the conductor say "Watch your step"; subsequent presses of the 2 button
will cause the conductor to say "All Aboard!" This permits you to step through an entire arrival/
departure script with single button presses. Additional "Watch your step" announcements may be
triggered at any time while the car is stopped by pressing the AUX1, 2 keys, if desired.
Car Speed
STOP
STOP
STOP
STOP
STOP
MOVING
MOVING
MOVING
MOVING
MOVING
MOVING
Station Arrival Announcement
Conductor: "Watch your step."
(First trigger after Station Arrival Announcement)
Conductor: "Watch your step."
(Trigger any time while stopped.)
Conductor: "All Aboard!"
Station Departure Announcement
Conductor: "Welcome aboard."
(First trigger after motion starts)
Conductor: "Tickets, please."
(Second trigger after motion starts)
Steward Dining Announcement(1)
(Alternating with Lounge Service)
Steward Dining Announcement(2)
((Alternating with Lounge Service)
Steward Lounge Service Announcement
Conductor: "Next stop!"
7
Effect