Stationsounds Command Table - Lionel StationSounds Owner's Manual

TrainMaster Command operations

StationSounds command table

Trigger
(In motion for less than 1.5 Minutes)
(In motion for more than 1.5 Minutes)
(In motion for more than 3 Minutes)
Table 2. StationSounds Command table
Some functions described above require you to press two keys in sequence, using the
key as a "prefix" before the numeric key (e.g.,
key without the "prefix" will produce a different function. If you have pressed the
other reasons (e.g., to"open" the keypad on your CAB-1), you can still trigger a "non-
prefixed" function by pressing the number
your desired function.
Also note that pressing the
arrival announcement will make the conductor say "Watch your step"; subsequent
presses will make the conductor say "All Aboard!" This permits you to step through an entire
arrival/ departure script with single key presses. Additional "Watch your step" announcements
may be triggered at any time while the car is stopped by pressing the
desired.
Car Speed
STOP
STOP
STOP
STOP
STOP
MOVING
MOVING
MOVING
MOVING
MOVING
key by itself immediately after you have played a station
Station Arrival Announcement
Conductor: "Watch Your Step."
(First Trigger After Station Arrival Announcement.)
Conductor: "Watch Your Step."
(Trigger Any Time While Stopped.)
Conductor: "All Aboard!"
Station Departure Announcement
Conductor: "Tickets Please."
(First Trigger After Motion Start.)
Steward Dining Announcement(1)
(Alternating with Lounge Service)
Steward Dining Announcement(2)
(Alternating with Lounge Service)
Steward Lounge Service Announcement
Conductor: "Next Stop!"
). Pressing the same numeric
(the unassigned numeric key) before triggering
6
Effect
key for
key
and keys, if