Changing The Input Display - Onkyo TX-SA706 Instruction Manual

First Time Setup—Continued

Changing the Input Display

If you connect an u-capable Onkyo MiniDisc
recorder, CD recorder, or RI Dock to the TAPE IN/OUT
or GAME/TV IN jacks, for u to work properly, you
must change this setting.
This setting can only be changed on the AV receiver/AV
amplifier.
1,2 1,2
iPod photo:
If you're using an iPod photo with the RI Dock, connect
the RI Dock to the GAME/TV IN jacks.
1
Press the [TAPE] or [GAME/TV]
input selector button so that
"TAPE" or "GAME/TV" appears
on the display.
or
2 Press and hold down the [TAPE]
or [GAME/TV] input selector but-
ton (about 3 seconds) to change
the setting.
Repeat this step to select MD, CDR, or
or
DOCK.
For the TAPE input selector, the setting
changes in this order:
TAPE
(3 seconds)
For the GAME/TV input selector, the
setting changes in this order:
GAME/TV
Note:
DOCK can be selected for the TAPE input selector or
GAME/TV input selector, but not both at the same time.
48
→ → →
MD CDR DOCK
↔
DOCK