Onkyo TX-SA706 Instruction Manual page 43

First Time Setup—Continued
Component Video Setup
If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD player to COMPONENT VIDEO IN 2, you
should assign it to the DVD input selector.
Input selector
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX
TAPE
TUNER (TX-SA706 only)
CD
PHONO
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [q]/[w] but-
tons to select "1. Input Assign",
and then press [ENTER].
The "Input Assign" menu appears.
1. Input Assign
1. HDMI Input
2. Component Video Input
3. Digital Audio Input
3 Use the Up and Down [q]/[w] but-
tons to select "2. Component
Video Input", and then press
[ENTER].
The "Component Video Input" menu
appears.
1–2. Component Video Input
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX
TAPE
TUNER
CD
PHONO
Default assignment
IN1
- - - - -
IN2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
IN1
- - - - -
IN2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
4
Use the Up and Down [q]/[w] but-
tons to select an input selector,
and then use the Left and Right
[e]/[r] buttons to select:
IN1: Select if the video component
is connected to COMPO-
NENT VIDEO IN 1.
IN2: Select if the video component
is connected to COMPO-
NENT VIDEO IN 2.
- - - - -: Select if you are using the
HDMI OUT, rather than the
COMPONENT VIDEO
MONITOR OUT, for the out-
put from composite video, S-
Video, and component video
sources.
5 Press the [SETUP] button.
The setup menu closes.
Note:
This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
43