Ink Pack Safety Instructions; Lcd Screen Safety Instructions - Epson WF-B4533 User Manual

LCD Screen Safety Instructions

Wireless Connection Safety Instructions
Telephone Equipment Safety Instructions
Parent topic:

Ink Pack Safety Instructions

• Keep ink packs out of the reach of children and do not drink the ink.
• Be careful when you handle used ink packs; there may be ink remaining around the ink supply port. If
ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them immediately
with water.
• Do not put your hand inside the product or touch any packs during printing.
• Install a new ink pack immediately after removing an expended one. Leaving packs uninstalled can
dry out the print head and may prevent the product from printing.
• Do not remove or tear the label on the pack; this can cause leakage.
• Do not shake packs after opening their packages; this can cause them to leak.
• Use an ink pack before the date printed on its package.
• Do not dismantle an ink pack. This could damage the print head.
• Store ink packs in a cool, dark place.
• After bringing an ink pack inside from a cold storage site, allow it to warm up at room temperature for
at least three hours before using it.
Parent topic:
LCD Screen Safety Instructions
• Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers.
• If the LCD screen is damaged, contact Epson. If the liquid crystal solution gets on your hands, wash
them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush them
immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor
immediately.
Parent topic:
Notices
General Product Safety Instructions
General Product Safety Instructions
222