Proto-Sound 2.0 Operating Instructions; Activating Proto-Sound 2.0 Conventional Mode Features - Rail King Genesis Operation Manual

decrease the volume.

Proto-Sound 2.0 Operating Instructions

This manual contains the operating instructions for Proto-Sound 2.0 in conventional
mode only. Instructions for accessing DCS command mode features accompany the
DCS Remote Control System equipment.

Activating Proto-Sound 2.0 Conventional Mode Features:

Proto-Sound 2.0 features are activated by sequences of Bell and Horn button pushes
described below. Please read the full descriptions of each feature before using it. To use
these buttons to activate features rather than to blow the horn or ring the
bell, you should tap the buttons very quickly with a ½-second pause
between button presses. You may need to practice your timing to make
s work smoothly.
Lubricate Axles
STEP
Remove the six Phillips screws from the chassis then lift the body away from the chassis.
1 1
STEP
Remove the truck blocks from the chassis by unscrewing the large Phillips motor mount screw
2 2
on the bottom of each truck block.
RailKing Genesis Passenger Set with Proto-Sound® 2.0
10
Grease Gears
Motor
Mount
Screw
DO NOT DO NOT
DO NOT
OVER OIL OVER OIL
OVER OIL
Lubricate Pick-Up Rollers
(Do Not Lube the Flat Part of Pick-Up Rollers)
Motor
Mount
Screw
thi