Proto-Sound 2.0 Operating Instructions; Activating Proto-Sound 2.0 Conventional Mode Features - Rail King 4-6-4 J3a Hudson Steam Locomotive Operator's Manual

Proto-Sound 2.0
Operating Instructions
The following pages contain the operating instructions for Proto-Sound 2.0 RailKing
One-Gauge locomotives when operated with AC output transfomrers in conventional
mode only. Instructions for accessing DCS command mode features accompany the DCS
Remote Control System equipment.
Activating Proto-Sound 2.0 Conventional
Mode Features
Proto-Sound 2.0 features are activated by sequences of Bell and Horn button pushes
described below. Please read the full descriptions of each feature before using it. To use
these buttons to activate features rather than to blow the horn or ring the bell, you should
Press
Horn
Short &
Firm
Feature to Be Activated
Freight Yard Announcements
Speed Control On/Off
Lock into a Direction
Reset to Factory Defaults
10
Timing Chart
½ Sec.
Pause
Total Time Lapse: 1
4-6-4 J3a Hudson Steam Locomotive
Press ½ Sec.
Bell Pause
Short &
Firm
½
Seconds
Button Code:
1 Bell, 2 Horns
1 Horn, 2 Bells (from Neutral only)
1 Horn, 3 Bells
1 Horn, 5 Bells (from Neutral only)
Press
Bell
Short &
Firm