Table of Contents
Advertisement
Proto-Sound 2.0
Operating Instructions
The following pages contain the operating instructions for Proto-Sound 2.0 RailKing
One-Gauge locomotives when operated with AC output transfomrers in conventional
mode only. Instructions for accessing DCS command mode features accompany the DCS
Remote Control System equipment. These features are only available when using an AC
Transformer equipped with a whistle and bell button.
Activating Proto-Sound 2.0 Conventional
Mode Features (AC Operation Only)
Proto-Sound 2.0 features are activated by sequences of Bell and Horn button pushes
described below. Please read the full descriptions of each feature before using it. To use
these buttons to activate features rather than to blow the horn or ring the bell, you should
tap the buttons very quickly with a ½-second pause between button presses. You may
need to practice your timing to make this work smoothly.
Press
Horn
Short &
Firm
Feature to Be Activated
Freight Yard Announcements
Speed Control On/Off
Lock into a Direction
Reset to Factory Defaults
4-6-6-4 Challenger Steam Locomotive
Timing Chart
Press
½ Sec.
Bell
Pause
Short &
Firm
Total Time Lapse: 1
Button Code:
1 Bell, 2 Horns
1 Horn, 2 Bells (from Neutral only)
1 Horn, 3 Bells
1 Horn, 5 Bells (from Neutral only)
½ Sec.
Pause
½
Seconds
Press
Bell
Short &
Firm
11
Advertisement
Table of Contents
