Utilizing The Targets - Fuel3D SCANIFY F3D2001 User Manual

Utilizing the targets

Placement of the target
It is important to understand the scanners'
capture area when selecting a subject and
while scanning.
The scanner is able to capture a subject that
is around 37cm/14.5" diagonal. If your
subject is larger than this, multiple scans may
be taken and then stitched together to create
a 3D model. Please note that stitching is
available in Studio Plus and Advanced
software options only.
The target also ensures that you are within
the correct range of the subject you are
scanning.
Scanner capture area
Scanning an inanimate subject
The target can be placed on the subject or to the side using, for example, the free standing
target holder.
It is important that the target is always facing towards the scanner.
You should not attempt to duplicate the target as this will cause errors when processing
your scans.
Additional targets can be purchased from www.fuel-3D.com
Good target positioning
13