When using A3, Ledger, Legal or
Folio size paper
1
Gently put the paper into the
paper tray print side down and
top edge first.
Check that the paper is flat in
the tray.
Portrait orientation
2
Close the output paper tray
cover.
h
Gently adjust the paper side guides to fit
the paper using both hands.
Make sure the paper side guides touch
the sides of the paper.
2
NOTE
Be careful not to push the paper in too far;
it may lift at the back of the tray and cause
feed problems.
i
Check that the paper is flat in the tray
and below the maximum paper
mark (1).
Overfilling the paper tray may cause
paper jams.
Loading paper
2
1
23