Brother MFC-J6520DW Basic User's Manual page 115

Hide thumbs Also See for MFC-J6520DW:
Table of Contents

Advertisement

Error Message
BT Call Sign On
(U.K. only)
Cannot Detect
Cannot Detect Ink
Volume
Cannot Print
Replace ink.
Comm. Error
Connection Failed
Cover is Open.
Data Remaining in
Memory
Cause
BT Call Sign is set to ON. You cannot
change the Receive Mode from
Manual to another mode.
You installed a new ink cartridge too
quickly and the machine did not
detect it.
An ink cartridge is not installed
correctly.
If you are using non Brother Original
ink, the machine may not detect the
ink cartridge.
If you are using non Brother Original
ink, the machine may not detect the
ink volume.
One or more of the ink cartridges
have reached the end of their life. The
machine will stop all print operations.
While memory is available,
monochrome faxes will be stored in
the memory. If a sending machine
has a colour fax, the machine's
"handshake" will ask that the fax be
sent as monochrome.
Poor telephone line quality caused a
communication error.
You tried to poll a fax machine that is
not in Polled Waiting mode.
The scanner cover is not locked in the
closed position.
The ink cartridge cover is not locked
in the closed position.
Print data is left in the machine's
memory.
Troubleshooting
Action
Set BT Call Sign to OFF.
(See Advanced User's Guide: BT Call
Sign (U.K. only).)
Take out the new ink cartridge and
re-install it slowly and firmly until the
cartridge lever lifts. (See Replacing
the ink cartridges on page 94.)
Replace the cartridge with a Brother
Original ink cartridge. If the error
message remains, contact Brother
customer service or your local
Brother dealer.
Replace the cartridge with a Brother
Original ink cartridge. If the error
message remains, contact Brother
customer service or your local
Brother dealer.
Replace the ink cartridges. (See
Replacing the ink cartridges
on page 94.)
If the problem continues, call the
telephone company and ask them to
check your telephone line.
Check the other fax machine's polling
setup.
Lift the scanner cover, and then close
it again.
Make sure the telephone line cord
and USB cable (if used) have been
guided correctly through the cable
channel and out the back of the
machine.
Firmly close the ink cartridge cover
until it locks into place.
Press
. The machine will cancel
the job and clear it from the memory.
Try to print again.
B
105

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j6720dw

Table of Contents