Affixing The Rubber Feet - Onkyo HTX-22HDXPAW Instruction Manual

Connecting the Speakers

Affixing the Rubber Feet

You can improve the sound quality by affixing the included rubber feet to raise the speakers off
the mounting surface thereby reducing the contact area. The feet also make the speakers stable
and prevent them from moving around.
■ Rubber Feet for the Amp/Subwoofer
HTX-22HDXPAW
Amp/Subwoofer underside
■ Rubber Feet for the Front Speakers
Rubber foot
HTX-22HDXST
bottom
Note:
• Before you wall-mount the front speakers, check the strength of the wall. The supporting
strength of the screws depends on the wall material and the position of the studs. Use screws
as thick and long as possible, with a head diameter of 10 mm (3/8") or less and a thread diam-
eter of 4 mm (5/32") or less. (We recommend that you consult a professional home electron-
ics installer.)
—Continued
Speaker
Rubber foot
Rubber foot
If you intend to wall-mount the front speakers using
their keyhole slots, affix two rubber feet to the rear of
each speaker for added stability.
Note:
• When you pick up the Amp/Sub-
woofer to affix the rubber feet,
place your hands away from the
speaker underneath.
HTX-22HDXST top
Keyhole mounting slot
15