Setting The Display Brightness; Muting The Htx-22Hdx; Using The Sleep Timer - Onkyo HTX-22HDXPAW Instruction Manual

Playing Your Components
SLEEP

Setting the Display Brightness

You can adjust the brightness of the display.
Press the remote controller's [DIMMER] but-
ton repeatedly to select dim, dimmer, or
normal brightness.

Muting the HTX-22HDX

You can temporarily mute the output of the
HTX-22HDX.
Press the remote controller's [MUTING] but-
ton.
The output is muted and the MUTING indi-
cator flashes on the display.
To unmute the HTX-22HDX, press the
remote controller's [MUTING] button again,
or adjust the volume. The output is unmuted
and the MUTING indicator goes off.
Muting is cancelled when the HTX-22HDX
is set to Standby.
—Continued

Using the Sleep Timer

With the sleep timer, you can set the
HTX-22HDX so that it turns off automati-
DIMMER
cally after a specified period.
Press the remote controller's [SLEEP] but-
ton repeatedly to select the required sleep
time.
MUTING
The sleep time can be set from 90 to 10 min-
utes in 10 minute steps.
When the sleep timer has been set, the
SLEEP indicator appears on the display, as
shown. The selected sleep time appears on
the display for about 5 seconds, then the pre-
vious display appears.
To cancel the sleep timer, press the [SLEEP]
button repeatedly until the SLEEP indicator
disappears.
To check the remaining sleep time, press
the [SLEEP] button. Note that if you press the
[SLEEP] button while the sleep time is being
displayed, you'll shorten the sleep time by 10
minutes.
SLEEP indicator
29