Onkyo digital surround system instruction manual (56 pages)
Summary of Contents for Onkyo HTP-2
Page 1
POWERED SUBWOOFER SATELLITE SPEAKERS Thank you for your purchase of the Onkyo speaker system. Please read this manual thoroughly before using it. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new speaker system.
WARNING: WARNING AVIS TO REDUCE THE RISK OF FIRE OR ELECTRIC RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the CAUTION: presence of uninsulated “dangerous voltage”...
The fuse is located inside the chassis and is not user- INDUSTRIESTRASSE 20 serviceable. 82110 GERMERING, If power does not come on, contact your Onkyo authorized GERMANY service station. declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding 3.
The HTP-2 is a 5.1-channel speaker package that consists of five satellite speakers and one subwoofer with an internal amplifier. The HTP-2 features the SL-105 subwoofer with L/R mixing circuits and a built- in cut-off filter as the subwoofer and the D-L5 speakers with an aluminum cabinet and OMF-cone as the five satellite speakers.
Speaker placement I Layout of your speaker system I Securing the satellite speakers Satellite speakers Mounting the speakers on the wall The supplied satellite speakers are all of the same Make sure that the walls are rigid enough for supporting the functionality, so use three as the left/right front and center speaker’s weight.
Connecting the speakers For safety reasons, do not turn on any devices or • Connect the input terminals on the rear of the satellite components until you have completed all wiring speakers to the speaker output terminals on the AV procedures.
Note: Make sure that the input levels do not reach excessive levels. The HTP-2 is designed for playing back music at a normal volume, but if the input levels are set to enormous levels, it may damage the speakers. Also, always first lower...
Precaution on use • If the unit is used near a turntable or CD player, howling I Placement or skipping of sound may occur. To prevent this, move • The enclosure is made of wood and therefore sensitive the unit away from the turntable or CD player or to extreme temperatures and humidity.
Specifications I Subwoofer SL-105 I Satellite speaker D-L5 Type Bass-reflex with built-in power Type Bass reflex amplifier Frequency response 125 Hz - 25 kHz For superbass-range Maximum input power 40 W reproduction Output sound pressure level 83 dB/W/m Frequency response 30-200 Hz 6 Ω...
Need help?
Do you have a question about the HTP-2 and is the answer not in the manual?
Questions and answers