Using Rubber Stoppers For More Stable Platform; Wall Mounting - Onkyo SKS-22X Instruction Manual

Using Rubber Stoppers for
more Stable Platform
We recommend using the supplied rubber
stoppers to achieve the best possible sound
from your speakers. The rubber stoppers pre-
vent the speakers from moving, providing a
more stable platform. Use thick rubber stop-
pers for the SKC-22X, and thin rubber stop-
pers for the SKR-22X
Thin rubber stoppers
Bottom of the SKR-22X
Thick rubber stoppers
Bottom of
the SKC-22X

Wall Mounting

The speakers can easily be wall mounted by
using the keyhole slots.
■ Mounting the SKC-22X
To mount the SKC-22X speaker, use the two
keyhole slots shown to hang the speaker on
two screws that are securely screwed into the
wall.
The distance between the keyhole slots is
183 mm (7-3/16").
50 mm
(1-15/16")
12 mm (1/2")
Keyhole slot for
wall mounting
Thick rubber
stoppers
183 mm (7-3/16")
■ Mounting the SKR-22X
To mount the SKR-22X speakers, use the key-
hole slot shown to hang each speaker on screw
that is securely screwed into the wall.
SKR-22X
Keyhole
slot for wall
Thick rubber stoppers
mounting
Caution:
A mounting screw's ability to support a speaker
depends on how well it's anchored to the wall.
If you have hollow walls, screw each mounting
screw into a stud. If there are no studs, or the
walls are solid, use suitable wall anchors.
Use screws with a head diameter of 9 mm
(5/16") or less and a shank diameter of 4 mm
(1/8") or less. With hollow walls, use a cable/
pipe detector to check for any power cables or
water pipes before making any holes.
Leave a gap of between 5 mm (3/16") and
10 mm (7/16") between the wall and the base
of the screw head, as shown.
(We recommend that you consult a home
installation professional.)
Wall
5 to 10 mm
(3/16" to 7/16")
Wall
5 to 10 mm
(3/16" to 7/16")
3