Speaker System HTP-120 Instruction Manual Thank you for purchasing the Onkyo speaker system. Please read this manual thoroughly before using it. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new speaker system.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
2. AC Fuse The fuse is located inside the chassis and is not user- serviceable. If power does not come on, contact your Onkyo authorized service station. 3. Care From time to time you should wipe off the front and rear panels and the cabinet with a soft cloth.
Control positions and names I Subwoofer SKW-120 Front Rear To AC outlet A. LINE INPUT (input jack) Connect this jack to the SUBWOOFER PREOUT jack of the DR-S2.2. B. Indicator The indicator changes from red to green when the subwoofer receives a signal. C.
Mounting the speakers I Satellite speakers D-120 Using spacers Attaching the supplied spacers is recommended for obtaining the best sound quality. Also, by attaching the provided spacers, the speakers will not slide easily for a more stable installation. Mounting the speakers on the wall •...
For safety reasons, do not turn on any devices or components until you have completed all wiring procedures. I Connecting the speakers D-120 and D-120C CAUTION: The HTP-120 is designed for the Onkyo DVD Receiver DR- S2.2. Do not connect other amplifiers as it may cause speaker damage. Front...
Note: Make sure that the input level does not reach excessive level. The HTP-120 is designed for playing back music at a normal volume, but if the input level is set to enormous levels, it may damage the speakers. Also, always first lower the volume at the amplifier before changing the settings of any switches to prevent accidental damage.